Titanium Alloy Gr 5 Flanges

Introduction 

Titanium Alloy Gr 5 FlangesRadiant Tubes And Fitting are leading Manufacturers, Exporters and Supplier of a wide range of Titanium Alloy Gr 5 Flanges that are using high quality raw materials in mumbai, India. We are manufactured these flanges as per the national & international quality standards. We also offer the complete range of grades like Titanium GR -5 Flanges. These are widely appreciated for its quality, corrosion resistant, and fine finishing. These titanium Alloy Gr 5 flanges are available different dimensions, specification & thickness as per the clients requirements. Titanium Gr 5 Socket Weld Flanges, is a high performance alloy that benefits greatly from double melting through the Electro Slag Refining (ESR) process. Electro Slag Refining (ESR) process ensures the cleanest and highest quality of Titanium Gr 5 Ring Joint Type Flanges is supplied. There is no need for post weld heat treatment in these Titanium Gr 5 Spectacle Blind Flanges. However, thorough cleaning after welding is critical for optimum corrosion resistance in Titanium Gr 5 Nippolet Flanges, or else there is the risk of contamination and embrittlement. Titanium Gr 5 Flanges has good corrosion resistance to sea water, and consequently is used in rigging, propeller shafts and other parts of boats that are bare to sea water. Titanium Gr 5 Flanges single-handedly is a light and strong metal. These Titanium gr 5 Flanges are used in military, glasses, oil & gas, medical equipment, petrochemical equipment, etc.

Titanium Alloy Gr 5 Flanges Specifications

Specifications:ASTM B381 / ASME SB381
Size:1/2″NB TO 60″NB
Standards:ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc.
Class / Pressure:150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.
Standard:ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc.

 

 

Titanium Alloy Gr 5 Flanges Chemical Composition

GradeTiCFeHNOAlV
Ti Grade590 min0.25 max0.2 max6 min4 min

 

Titanium Alloy Gr 5 Flanges Mechanical Properties

ElementDensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation
Titanium Gr. 54.43 g/cm31632 °C (2970 °F)Psi – 138000 , MPa – 950Psi – 128000 , MPa – 88014 %

 

Equivalent Grades for Gr 5 Titanium Industrial Flanges

STANDARDWERKSTOFF NR.UNS
Titanium Gr. 53.7165N56400