Super Duplex Steel UNS S32750 Perforated Sheet
Introduction
Radiant Tubes And Fitting is one of the leading Manufacturer, Supplier, Exporter of Super Duplex Steel UNS S32750 Perforated Sheets in India. super duplex steel UNS S32750 perforated sheets are super duplex steel-chromium alloy with an addition of aluminum for outstanding resistance to oxidation and other forms of high temperature corrosion. These super duplex steel UNS S32750 perforated sheets (UNS S32750) are used for Heat treating muffles and retorts, Catalyst support grids in nitric acid production, Radiant tubes, Steam super-heater tube supports, and more. super duplex steel Alloy UNS S32750 sheet are also used in fabricated combustion chambers, tube supports and ash trays in the power generation industry. super duplex steel UNS S32750 sheet is a solid solution super duplex steel chromium heat resisting alloy. super duplex steel s32750 perforated sheet also has good aqueous corrosion resistance due to the high super duplex steel content in combination with chromium. Strength and toughness super duplex steel are good, and are retained during extended service at high temperature. super duplex steel UNS S32750 perforated sheet has good resistance to nitriding in super duplex steelociated ammonia, and is only outperformed by super duplex steel UNS S32750 Coil in this application. super duplex steel UNS S32750 Rolling perforated sheet has good strength, ductility and toughness super duplex steel, and can be used at cryogenic temperatures. super duplex steel UNS S32750 Flat perforated sheet is a super duplex steel alloy and available in the various forms including super duplex steel Alloy UNS S332750 perforated sheet & super duplex steel UNS S32750 Perforated perforated sheet etc. super duplex steel UNS S32750 Rolling perforated sheet has good high temperature strength and retains its ductility after long service exposure, with good corrosion resistance under oxidizing conditions. super duplex steel UNS S32750 Hot rolled perforated sheet is very resistant to high-temperature oxidation – and its also has good resistance to aqueous corrosion. super duplex steel UNS S32750 Clad perforated sheets are suitable to use at elevated temperatures. We offer super duplex steel UNS S32750 perforated sheet, super duplex steel UNS S32750 perforated sheet are in different sizes, specifications and shapes as per demands of our esteemed customers.
SPECIFICATIONS
ASTM A240 / ASME SA240 Super Duplex Steel Perforated and Chequered Sheet Specification
Size : 1250mm x 2500mm, 1500mm x 3000mm, 2000mm x 6000mm.
Specifications : ASTM/ASME
Designation : ASTM A240, ASME SA240
Material Grades : Duplex Steel UNS S32750
Form : Round Holes Perforated Sheet, Square Holes Perforated Sheet, Slotted Holes Perforated Sheet, Ornamental Perforated Sheet, Decorative Perforated Sheet, Custom Perforated Sheet, Uniform surface Chequered Sheet.
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Thickness : 5mm To 50mm & above
SUPER DUPLEX STEEL UNS S32750 PERFORATED AND CHEQUERED SHEET EQUIVALENT GRADES
| STANDARD | WERKSTOFF NR. | UNS |
| Super Duplex UNS S32750 | 1.4410 | S32750 |
SUPER DUPLEX STEEL UNS S32750 PERFORATED AND CHEQUERED SHEET CHEMICAL COMPOSITION
| Element | C | Mn | Si | P | S | Cr | Mo | Ni | N | Fe |
| UNS S32750 | 0.030 max | 1.20 max | 0.80 max | 0.035 max | 0.020 max | 24.00 – 26.00 | 3.00 – 5.00 | 6.00 – 8.00 | 0.24 – 0.32 | 58.095 min |
SUPER DUPLEX STEEL UNS S32750 PERFORATED AND CHEQUERED SHEET MECHANICAL & PHYSICAL PROPERTIES
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Super Duplex Steel UNS S32750 | 7.8 g/cm3 | 1350 °C (2460 °F) | Psi – 116000 , MPa – 800 | Psi – 80000 , MPa – 550 | 15 % |