SS 304 Shims, 304L Stainless Steel Shims Suppliers, Manufacturer In India.
304H SS Perforated Shims, 304L Stainless Steel Shims, SAIL 304 Stainless Steel Shims Suppliers In India.
Stainless Steel 304L Shims, SS Shims, Polished 304H Stainless Steel Shims Supplier, Manufacturer, Exporter In India
Introduction
Radiant Tubes And Fitting is one of the leading manufacturer, suppliers, exporter of stainless steel 304/ 304l/ 304h Shims using high quality of raw material. Stainless steel 304/ 304l/ 304h Shims have high strength and resistance to oxidation, carburisation and other harmful effects of high temperature exposure. The high contents of nickel and chromium in the alloys also give good corrosion resistance. stainless steel 304 was the first of these alloys and it was slightly modified into Incoloy 800H. This modification was to control carbon (.05-.10%) and grain size to optimize stress rupture properties. stainless steel 304l/304h shims was intended for high temperature structural applications. The nickel content makes the alloys highly resistant to both chloride stress-corrosion cracking and to embrittlement from precipitation of sigma phase. The general corrosion resistance is excellent. In the solution annealed condition, stainless steel 304l shims and 304H shims have superior creep and stress rupture properties. Stainless steel 304 shims are used in a variety of applications involving exposure to corrosive environments and high temperatures such as heat treating equipment, chemical and petrochemical processing, nuclear power plants and the paper pulp industry. Heat-treating equipment such as baskets, trays, and fixtures employ stainless steel 304/304l/304h Shims. Chemical and petrochemical processing industries use the alloys for heat exchangers and other piping systems in nitric acid media especially where resistance to chloride stress-corrosion cracking is required. Power plants use them for super-heater and re-heater tubing. We also offer these Products are available in different size,grades, specification & thickness as per the clients requirements.
Specification:
Thickness | 0.02 MM to 3.0 MM |
Material Grade | SS 304, 304L, 316L, 321, 347 |
Material | Stainless Steel |
Surface Treatment | Bright Annealed (BA) |
Tensile Strength | 500 / 565 MPa |
Chemical Composition:Ā
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | |
304 | min. | ā | ā | ā | ā | ā | 18.0 | ā | 8.0 | ā |
max. | 0.08 | 2.0 | 0.75 | 0.045 | 0.030 | 20.0 | 10.5 | 0.10 | ||
304L | min. | ā | ā | ā | ā | ā | 18.0 | ā | 8.0 | ā |
max. | 0.030 | 2.0 | 0.75 | 0.045 | 0.030 | 20.0 | 12.0 | 0.10 | ||
304H | min. | 0.04 | ā | ā | ā | ā | 18.0 | ā | 8.0 | ā |
max. | 0.10 | 2.0 | 0.75 | 0.045 | 0.030 | 20.0 | 10.5 |
Mechanical properties:
Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness | |
Rockwell B (HR B) max | Brinell (HB) max | ||||
304 | 515 | 205 | 40 | 92 | 201 |
304L | 485 | 170 | 40 | 92 | 201 |
304H | 515 | 205 | 40 | 92 | 201 |
Physical properties:
Grade | Density (kg/m3) | Elastic Modulus (GPa) | Mean Coefficient of Thermal Expansion (m/m/0C) | Thermal Conductivity (W/m.K) | Specific Heat 0-1000C (J/kg.K) | Electrical Resistivity (n.m) | |||
0-1000C | 0-3150C | 0-5380C | at 1000C | at 5000C | |||||
304 | 8000 | 193 | 17.2 | 17.8 | 18.4 | 16.2 | 21.5 | 500 | 720 |
304L | 8000 | 193 | 17.2 | 17.8 | 18.4 | 16.2 | 21.5 | 500 | 720 |
304H | 8000 | 193 | 17.2 | 17.8 | 18.4 | 16.2 | 21.5 | 500 | 720 |
- Stainless Steel 321/321H Pipes And Tubes
- Stainless Steel 904L Pipes and Tubes
- Stainless Steel 446 Pipes and Tubes
- Stainless Steel 317/ 317L Pipes & Stainless Steel 317 Tubes
- Stainless Steel 304/304H Pipes And Tubes
- Stainless Steel 304L Pipes
- Stainless Steel 316/316L/316Ti Pipes and Tubes
- Stainless Steel 310/310S Pipes And Tubes
- Stainless Steel 347/ 347H Pipes & Stainless Steel 347/ 347H Tubes
- Stainless Steel 304/304L/304H Shims
- Stainless Steel 316/316L/316Ti Shims
- Stainless Steel 321/321H, 310/310S, 317/317L, 347/347H, 446
- Stainless Steel 904L Shims
- Stainless Steel 304/304L/304H, 316/316L/316Ti, 321/321H, 310/310S, 317/317L, 347/347H, 446 Pipe Spool
- Stainless Steel 904L Pipe Spools
- Stainless Steel 304/304L/304H, 316/316L/316Ti, 321/321H, 310/310S, 317/317L, 347/347H, 446 Perforated Sheet
- Stainless Steel 904L Perforated Sheet
- Stainless Steel 304/304L/304H, 316/316L/316Ti, 321/321H, 310/310S, 317/317L,347/347H, 446, 17-4 PH,15-5 PH, Nitronic 50, 60 Filler Wire
- Stainless Steel 304/304L/304H, 316/316L/316Ti, 321/321H, 310/310S, 317/317L, 347/347H, 446 Wiremesh
- Stainless Steel 904L Wiremesh
- Stainless Steel 304/304L/304H, 316/316L/316Ti, 321/321H, 310/310S, 317/317L, 347/347H, 446 Flanges
- Stainless Steel 904L Flanges
- Stainless Steel 904L Plates and Sheets
- Stainless Steel 304/304L/304H, 316/316L/316Ti, 321/321H, 310/310S, 317/317L, 347/347H, 446, 17-4 PH , 15-5 PH, 410, 420, 430 Plates And Sheet
- Stainless Steel 304/304L/304H, 316/316L/316Ti, 321/321H, 310/310S, 317/317L, 347/347H, 446 Instrumentation Valves
- Stainless Steel 904L Instrumentation Valves
- Stainless Steel 317/317L Long Radius Bends
- Stainless Steel 347/347H Long Radius Bends
- Stainless Steel 446 Long Radius Bends
- Stainless Steel 904L Long Radius Bends
- Stainless Steel 304/304L/304H, 316/316L/316Ti, 321/321H, 310/310S, 317/317L, 347/347H, 446 Forged Fittings
- Stainless Steel 904L Forged Fittings
- Stainless Steel 304/304L/304H, 316/316L/316Ti, 321/321H, 310/310S, 317/317L, 347/347H, 446 Compression Tube Fittings
- Stainless Steel 904L Compression Tube Fittings
- Stainless Steel 904L Olets
- Stainless Steel 304/304L/304H, 316/316L/316Ti, 321/321H, 310/310S, 317/317L, 347/347H, 446 Olets
- Stainless Steel 304/304L/304H, 316/316L/316Ti, 321/321H, 310/310S, 317/317L, 347/347H, 446 Buttweld Fittings
- Stainless Steel 904l Buttweld Fittings
- Stainless Steel 304/304L/304H, 316/316L/316Ti, 321/321H, 310/310S, 317/317L, 347/347H, 446, 17-4 PH, 15-5 PH, 410, 420, 430F, 416, 440C, Nitronic 50, 60 Round Bars And Wires
- Stainless Steel 904L Round Bars And Wires
- Stainless Steel 321/321H Long Radius Bends
- Stainless Steel 304/304L/304H Long Radius Bends
- Stainless Steel 316/316L/316Ti Long Radius Bends
- Stainless Steel 904L Filler Wire
Ā
Ā
Ā
Ā
Ā
Ā
Ā
Ā
Ā
Ā
Ā
Ā
Ā
Ā
Ā
Ā
Ā
Ā
Ā
Ā
Ā
Ā
Ā
Ā
Ā
Cities We deliver:
Bhopal, Lahore, Milan, Hyderabad, Pune, Vadodara, Pimpri-Chinchwad, Aberdeen, Howrah, Jeddah, Riyadh, Bogota, Petaling Jaya, Dallas, Lagos, Nagpur, Houston, Brisbane, Busan, Karachi, Coimbatore, Seoul, Caracas, Atyrau, Perth, Haryana, Bengaluru, Jaipur, Al Jubail, Kuwait City, Al Khobar, Sydney, Ranchi, Chiyoda, Noida, Chandigarh, Secunderabad, Ahvaz, Port-of-Spain, Singapore, Gurgaon, Rajkot, Rio de Janeiro, Abu Dhabi, Hong Kong, Surat, Sharjah, Hanoi, London, Muscat, Jakarta, Navi Mumbai, Istanbul, Kolkata, Cairo, Mumbai, Santiago, Montreal, Faridabad, Vung Tau, Bangkok, Ankara, Ahmedabad, Granada, Melbourne, Tehran, Visakhapatnam, New Delhi, Los Angeles, Ho Chi Minh City, Edmonton, La Victoria, Baroda, Thane, Nashik, Kuala Lumpur, Moscow, Ernakulam, Courbevoie, Calgary, Geoje-si, Indore, New York, Mexico City, Gimhae-si, Ludhiana, Kanpur, Ulsan, Thiruvananthapuram, Manama, Doha, Chennai, Madrid, Jamshedpur, Algiers, Dammam
Ā
Countries We Deliver:
Iran, Venezuela, Saudi Arabia, Slovakia, Romania, Zimbabwe, Spain, Kazakhstan, Canada, Nigeria, Bulgaria, Afghanistan, Thailand, Bangladesh, Poland, United Kingdom, Bahrain, Jordan, Lithuania, Malaysia, France, Nigeria, Japan, Oman, Lebanon, Germany, Croatia, Australia, Puerto Rico, South Korea, Hungary, United States, Bhutan, Mexico, Mexico, Yemen, Singapore, New Zealand, Ecuador, Gabon, Qatar, Denmark, Iran, Netherlands, Norway, Sri Lanka, Belgium, Libya, Kuwait, Pakistan, Gambia, Sweden, Azerbaijan, Argentina, Chile, Ghana, United Arab Emirates, Finland, Nepal, Trinidad andamp; Tobago,Tunisia, Kenya, Peru, Austria, Russia, Ukraine, Italy, Belarus, Bolivia, Serbia, Poland, Mongolia, Turkey, Czech Republic, South Africa, Angola, India, Vietnam, Indonesia, Tibet, Ireland, Costa Rica, Greece, Colombia, Namibia, Iraq, Estonia, Israel, Macau, Philippines, Brazil, Switzerland, Algeria, Morocco, Chile, Portugal, Egypt, Taiwan, China, Hong Kong.