Inconel 718 Filler Wire

Inconel 718 Filler Wire

Inconel 718 Filler Wire Manufacturer

UNS N07718 Filler Wire Manufacturer, Supplier, Exporter In India

Introduction

Inconel 718 Filler Wireradiant tubes and fittings is a leading Manufacturer, Exporter, Supplier and Stockist of Inconel 718 filler wire in India. Inconel 718 filler Wire are used where the properties of inconel are corrosion resistance are required. Heat treatment (solution annealing) of inconel filler Wire has to be done if the technical standard specify about the same. Normally inconel 718 filler Wire are being heat treated with water quenching process. These Inconel 718 filler wire have to be heated up to 1080 degree Celsius temperature and thereafter it has to drop the temperature by water quenching process. These process is being conducted on inconel Bright Wire on as rolled condition. . These inconel 718 Fillers Wires are used because they are not sensitive to intergranular corrosion after heating within the carbide precipitation range of 425 Degree C ā€“ 850 Degree C. 718 inconel Welding Wires has the higher carbon content, which makes it ideal for applications requiring good mechanical properties at elevated temperatures. Inconel 718 Wires exhibit excellent resistance to a wide range of atmospheric, chemical, textile, petroleum industry, and food industry exposures. We also offer uns n07718 Filler Wires who doesnā€™t require post-weld annealing, and is widely used in heavy-gauge components where its immunity to carbide precipitation is needed. These inconel steel 718 filler wire are available in various sizes, shapes as per the requirements of our clients.

Inconel 718 Filler Wire Specifications

Specifications : ASTM B637 ASME SB637
Dimensions : ANSI/AWCI ā€“ 01 -1992 and ASTM E 2016-11 and RRW 360
Length : 100 mm TO 6000 mm
Diameter : 10 mm To 100 mm
Specialize : Filler Wire, Coil Wire

Inconel 718 Filler Wire Chemical Composition

Grade C Mn Si Cu S Cr Fe Ni N
Inconel 718 0.08 max 0.35 max 0.35 max 0.30 max 0.15 max 17.0-21.0 ā€“ 50.0-55.0 ā€“

Inconel 718 Filler Wire Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.2 g/cm3 1350 Ā°C (2460 Ā°F) Psi ā€“ 1,35,000 , MPa ā€“ 930 Psi ā€“ 75,000 , MPa ā€“ 482 45 %

Equivalent Grades for 718 Inconel Filler Wire

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Inconel 718 2.4668 No7718 NCF 718 ā€“ ā€“ ā€“ ā€“