Inconel 625 Plates & Inconel 625 Sheets

Inconel 625 Plates, Inconel 625 Sheets, UNS N06625 Sheets, Nickel Alloy 625 Sheet, Cold Rolled Plate, Inconel Alloy 625 Shim Sheet, Inconel 625 Plate Standard, Inconel Plate suppliers,  Alloy 625 Lcf Sheet, ASTM B443 Alloy 625 Plate & Sheet, Inconel 625 Plate Standard Specification, ASME SB 443 UNS N06625 Plate, ASME SB443 Inconel 625 Sheet/ Plate, ASTM B443 Alloy 625, Inconel 625 ASTM B443,UNS N06625 Plates, ASTM SB443 Coils Plates etc  Manufacturer, Supplier, Exporter in India.

ASTM B443 UNS N06625 Strip supplier in India, best price of cut to size Inconel Sheet in India, Inconel 625 Plate Specifications,  AMS 5599 Polished Plate in Mumbai, Inconel 625 Plate Sizes, Inconel 625 technical data sheet, Inconel 625 Mechanical Properties and Yield Strength, Nickel Alloy 625 Coil , Werkstoff No 2.4856 Plate thickness and weight, Inconel 625 Plate Price, ASME SB443 Plain Sheets etc Manufacturer, Supplier, Exporter in India.Inconel Din 2.4856 Sheets Manufacturer, Inconel 625 Hot Rolled Plates, Inconel Alloy 625 Chequered Plate, Inconel Uns N06625 Plates, 625 Inconel Alloy Perforated Sheets, 625 Inconel Alloy Plates Supplier in India.

Introduction

Inconel 625 Plates And Sheets

radianttubesandfittings is one of the leading Manufacturer, Supplier, Exporter of Inconel 625 Plates & Inconel 625 Sheets in IndiaInconel 625 Plates & Inconel 625 Sheets are nickel-chromium alloy with an addition of aluminum for outstanding resistance to oxidation and other forms of high temperature corrosion. These Inconel 625 sheets (UNS N06625) are used for Heat treating muffles and retorts, Catalyst support grids in nitric acid production, Radiant tubes, Steam super-heater tube supports, and more. Inconel 625 Plates are also used in fabricated combustion chambers, tube supports and ash trays in the power generation industry. Inconel 625 Sheet is a solid solution nickel chromium heat resisting alloy which gives outstanding performance at temperatures up to about 1200°C. ASME SB 443 UNS 06625 also has good aqueous corrosion resistance due to the high nickel content in combination with chromium. Strength and toughness are good, and are retained during extended service at high temperature. 2.4856 Plate has good resistance to nitriding in dissociated ammonia, and is only outperformed by Inconel 625 Plates in this application. Inconel 625 Rolling Sheet has good strength, ductility and toughness, and can be used at cryogenic temperatures. Inconel 625 Flat Sheet is a Inconel alloy and available in the various forms including Inconel Alloy 625 Plate & Inconel 625 Perforated Plate etc. Inconel 625 ASTM B443 has good high temperature strength and retains its ductility after long service exposure, with good corrosion resistance under oxidizing conditions. Inconel 625 Hot rolled Plate is very resistant to high-temperature oxidation – up to 2200 º F – and its also has good resistance to aqueous corrosion. Inconel 625 Clad Plates are suitable to use at elevated temperatures. We offer inconel 625 plate, inconel 625 sheet are in different sizes, specifications and shapes as per demands of our esteemed customers.

Inconel 625 Plate & Sheet Specifications:

Specifications : ASTM / ASME SB 443
Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness : 0.1mm to 12 mm Thk
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

 

Inconel 625 Plates Chemical Composition:

Element Percent by Weight
Carbon 0.010 maximum
Manganese 0.50 maximum
Phosphorus 0.015 maximum
Sulfur 0.015 maximum
Silicon 0.50 maximum
Chromium 20.00 – 23.00
Nickel Balance
Molybdenum 8.00 – 10.00
Columbium 3.15 – 4.15
Titanium 0.40 maximum
Aluminum 0.40 maximum
Tantalum 0.05 maximum
Iron 5.00 maximum

Inconel 625 Mechanical Properties and Yield Strength:

Mechanical Properties and Yield Strength of Alloy 625 Plate

Temperature 0.2% Yield Strength Ultimate Tensile Strength Elongation Percent
°F °C psi MPa psi MPa
1920 1065 63,000 430 136,000 940 51.5

The technical data provided is for information only and not for design purposes. It is not warranted or guaranteed.

Typicals Values at 68°F (20°C)

Yield Strength
0.2% Offset
Ultimate Tensile
Strength
Elongation
in 2 in.
Hardness
psi (min.) (MPa) psi (min.) (MPa) % (min.) (max.)
65,000 448 125,000 862 50 200 Brinell

Equivalent Grades for Inconel 625 Plate:

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Inconel 625 2.4856 N06625 NCF 625 NA 21 ХН75МБТЮ NC22DNB4MNiCr22Mo9Nb NiCr23Fe

Inconel 625 Plate Sizes:

Thickness Thickness Plate Weight per Unit Area Density
3/16 inches 0.187 inches 4.75 mm 0.06000 lbs/in² 42.184176 kg/m² 0.315 lbs/in³ 8.72 g/cm³
1/4 inches 0.25 inches 6.3500 mm 0.08 lbs/in² 56.245568 kg/m² 0.315 lbs/in³ 8.72 g/cm³
3/8 inches 0.375 inches 9.52 mm 0.121 lbs/in² 85.0714216 kg/m² 0.315 lbs/in³ 8.72 g/cm³
1/2 inches 0.500 inches 12.7 mm 0.161 lbs/in² 113.1942056 kg/m² 0.315 lbs/in³ 8.72 g/cm³
5/8 inches 0.625 inches 15.87 mm 0.196 lbs/in² 137.8016416 kg/m² 0.315 lbs/in³ 8.72 g/cm³
3/4 inches 0.750 inches 19.05 mm 0.235 lbs/in² 165.221356 kg/m² 0.315 lbs/in³ 8.72 g/cm³
7/8 inches 0.875 inches 22.22 mm 0.274 lbs/in² 192.6410704 kg/m² 0.315 lbs/in³ 8.72 g/cm³
1 inches 1.000 inches 25.4 mm 0.313 lbs/in² 220.0607848 kg/m² 0.315 lbs/in³ 8.72 g/cm³
1 1/4 inches 1.250 inches 31.75 mm 0.391 lbs/in² 274.9002136 kg/m² 0.315 lbs/in³ 8.72 g/cm³
1 1/2 inches 1.500 inches 38.1 mm 0.47 lbs/in² 330.442712 kg/m² 0.315 lbs/in³ 8.72 g/cm³
1 3/4 inches 1.750 inches 44.45 mm 0.549 lbs/in² 385.9852104 kg/m² 0.315 lbs/in³ 8.72 g/cm³
2 inches 2.000 inches 50.8 mm 0.627 lbs/in² 440.8246392 kg/m² 0.315 lbs/in³ 8.72 g/cm³
2 1/4 inches 2.250 inches 57.15 mm 0.705 lbs/in² 495.664068 kg/m² 0.315 lbs/in³ 8.72 g/cm³
2 1/2 inches 2.500 inches 63.5 mm 0.784 lbs/in² 551.2065664 kg/m² 0.315 lbs/in³ 8.72 g/cm³
2 3/4 inches 2.75 inches 69.85 mm 0.862 lbs/in² 606.0459952 kg/m² 0.315 lbs/in³ 8.72 g/cm³
3 inches 3.000 inches 76.2 mm 0.941 lbs/in² 661.5884936 kg/m² 0.315 lbs/in³ 8.72 g/cm³

Inconel 625 technical data sheet:

Inconel 625 Datasheet/ Alloy 625 Data Sheet

Average Hardness and Tensile Data, Room Temperature
Condition Form Ultimate
Tensile
Strength,
ksi (MPa)
Yield
Strength
at 0.2%
offset,ksi (MPa)
Elongation
in 2″
percent
Hardness,
Rockwell
Annealed at
1925°F (1052°C),
rapid cooled
Sheet
0.014-0.063″
thick
132.0 (910) 67.9 (468) 47 B94
Annealed at
1925°F (1052°C),
rapid cooled
Sheet,*
0.0.78-0.155″
thick
131.5 (907) 67.4 (465) 45 B97
Annealed at
1925°F (1052°C),
rapid cooled
Plate,***
1/4″
1/2″
3/4″
1.00″
1-1/2″
1-3/4″
132.0 (910)
130.0 (896)
132.3 (912)
127.2 (877)
127.3 (878)
128.0 (883)
65.5 (452)
67.0 (462)
80.0 (552)
75.3 (519)
73.7 (508)
66.0 (455)
46
44
44
42
43
44
B94
B98
B98
B97
B97
C20
Aged Hardness, Room Temperature
Form Aging Temperature,
F (C)
Aging Tme, hrs. Hardness,
Rockwell A
Plate,
1/2 in. (12.7 mm)
thick
Annealed** 58
1200 (649) 1000
4000
8000
68
68
68
1400 (760) 1000
4000
8000
65
66
65
1600 (871) 1000
4000
8000
60
60
60

Single tests from a single heat.
1875F (1024C), rapid cooled.

Average Tensile Data, Room Temperature
Form Aging Temperature,
F (C)
Aging Tme, hrs. Ultimate
Tensile
Strength,
Ksi (MPa)
Yield
Strength
at 0.2%
offset,
Ksi (MPa)
Elongation
in 2 in.,
(50.8 mm),
percent
Plate,
1/2 in. (12.7 mm)
thick
Annealed** 127.7 (880) 66.2 (456) 46
1200 (649) 1000
4000
8000
16000
165.0 (1138)
163.6 (1128)
164.2 (1132)
165.4 (1140)
122.3 (843)
117.9 (813)
117.8 (812)
118.5 (817)
28
24
18
12
1400 (760) 1000
4000
8000
16000
142.9 (985)
145.5 (1003)
142.6 (983)
140.4 (968)
95.5 (658)
104.1 (718)
97.4 (672)
96.1 (663)
17
12
13
12
1600 (871) 1000
4000
8000
16000
130.0 (896)
130.0 (896)
127.0 (876)
128.4 (885)
68.3 (471)
66.4 (458)
63.7 (439)
63.4 (437)
30
29
26
32

Average of three tests from a single heat.
1875F (1024C), rapid cooled.

Average Tensile Data, Sheet
Test
Temperature,
°F(°C)
Ultimate
Tensile
Strength,
ksi (MPa)
Yield
Strength
at 0.2%
offset,ksi (MPa)
Elongation
in 2″
percent
Room
200
400
600
800
1000
1200
1400
1600
1800
2000
138.8 (957)
133.3 (919)
129.4 (892)
125.6 (866)
122.2 (843)
119.9 (827)
119.6 (825)
88.4 (609)
52.1 (359)
25.0 (172)
13.3 (92)
72.0 (496)
67.3 (464)
62.2 (429)
59.5 (410)
59.2 (408)
58.8 (405)
57.0 (393)
55.3 (381)
34.9 (241)
10.8 (75)
6.1 (42)
38
41
44
45
45
46
47
70
69
108
89

Annealed at 1925°F (1052°C), rapid cooled.

Average Rupture Data, Sheet*

Test Temperature,
°F(°C)
Average Rupture Strength, ksi (MPa)
for Time Indicated
10 hrs 100 hrs 1000 hrs
1200 (649)
1400 (760)
1600 (871)
82 (565)
36 (248)
12 (83)
71 (490)
27 (186)
6.7 (46)
60 (414)
20 (138)**
3.7 (26)**

Annealed at 1925°F (1052°C), rapid cooled.
Extrapolated

ASME SB 443 UNS N06625 Plate Corrosion Resistance:

Alloy 625 shows excellent corrosion resistance in a wide range of media.

  • Outstanding resistance to pitting and crevice corrosion in chloride-bearing media and to impingement corrosion or inter-granular attack
  • High resistance to corrosive attack by mineral acids, such as nitric phosphoric, sulphuric, and hydrochloric acids, as well as to alkalis and organic acids in both oxidizing and reducing conditions

Inconel 625 Thermal Conductivity:

Temperature Range Linear Coefficients of Thermal Expansion1 · 10-6 Thermal Conductivity2 3
°C °F /°C /°F W/m·K Btu/(hr/ft²/in/°F)
-157 -250 7.3 4.2
-129 -200 7.4 4.3
-73 -100 8.3 4.8
-18 0 9.2 5.3
21 70 9.9 5.7
38 100 10.0 5.8
93 200 12.8 7.1 10.7 6.3
204 400 13.1 7.3 12.6 7.3
316 600 13.3 7.4 14.2 8.2
427 800 13.7 7.6 15.7 9.1
538 1000 14.0 7.8 17.5 10.1
649 1200 14.8 8.2 19.0 11.0
760 1400 15.3 8.5 20.8 12.0
871 1600 15.8 8.8 22.8 13.2
927 1700 16.2 9.0
982 1800 25.3 14.6
  1. Average coefficient from 70°F (21°C) to temperature shown
  2. Measurements made at Battelle Memorial Institute
  3. Material annealed 2100°F (1149°C)

Inconel 625 Plate Electrical Resistivity:

Temperature microhm-cm
°C °F
21 70 128.9
38 100 129.6
93 200 131.9
204 400 133.9
316 600 134.9
427 800 135.9
538 1000 137.9
649 1200 137.9
760 1400 136.9
871 1600 135.9
982 1800 134.9
1093 2000 133.9

FEATURES OF NICKEL ALLOY 625 PLATE:

High tensile, creep, and rupture strength

Outstanding fatigue and thermal-fatigue strength

Excellent oxidation resistance

Excellent weldability and brazeability

Immune to chloride ion stress corrosion cracking

Corrosion-resistance of nickel alloys in four 24-hour tests in boiling acetic acid

Alloy Acetic Acid
Concentration
Corrosion/Erosion Rate
mpy mm/a
Alloy 625 10% 0.39-0.77 0.01-0.19

Resistance of nickel alloys to impingement attack by seawater at 150 ft/sec (45.7 m/s)

Alloy Corrosion/Erosion Rate
mpy mm/a
Alloy 625 Nil Nil

The comparative PREN number for alloy 625 is shown in the table below.

Pitting resistance equivalency numbers (PREN) for corrosion resistant alloys

Alloy Ni Cr Mo W Nb N PREN
Alloy 625 62 22 9 3.5 40.8

Inconel 625 Sheet Size:

Inconel 625 Plates STOCKED SIZES
SIZE ALLOY 625 SIZE
.125″ X 3.18mm
.134″   3.40mm
.156″ X 3.96mm
.187″ X 4.75mm
.250″ X 6.35mm
.312″ X 7.92mm
.375″ X 9.53mm
.500″ X 12.7mm
.625″ X 15.9mm
.750″ X 19.1mm
.875″   22.2mm
1″ X 25.4mm
1.125″   28.6mm
1.250″ X 31.8mm
1.500″ X 38.1mm
1.750″ X 44.5mm
2″ X 50.8mm
2.500″ X 63.5mm
3″   76.2mm
 radianttubesandfittings

Countries We Deliver

Iran, Venezuela, Saudi Arabia, Slovakia, Romania, Zimbabwe, Spain, Kazakhstan, Canada, Nigeria, Bulgaria, Afghanistan, Thailand, Bangladesh, Poland, United Kingdom, Bahrain, Jordan, Lithuania, Malaysia, France, Nigeria, Japan, Oman, Lebanon, Germany, Croatia, Australia, Puerto Rico, South Korea, Hungary, United States, Bhutan, Mexico, Mexico, Yemen, Singapore, New Zealand, Ecuador, Gabon, Qatar, Denmark, Iran, Netherlands, Norway, Sri Lanka, Belgium, Libya, Kuwait, Pakistan, Gambia, Sweden, Azerbaijan, Argentina, Chile, Ghana, United Arab Emirates, Finland, Nepal, Trinidad andamp; Tobago,Tunisia, Kenya, Peru, Austria, Russia, Ukraine, Italy, Belarus, Bolivia, Serbia, Poland, Mongolia, Turkey, Czech Republic, South Africa, Angola, India, Vietnam, Indonesia, Tibet, Ireland, Costa Rica, Greece, Colombia, Namibia, Iraq, Estonia, Israel, Macau, Philippines, Brazil, Switzerland, Algeria, Morocco, Chile, Portugal, Egypt, Taiwan, China, Hong Kong.

 

Cities We deliver

Bhopal, Lahore, Milan, Hyderabad, Pune, Vadodara, Pimpri-Chinchwad, Aberdeen, Howrah, Jeddah, Riyadh, Bogota, Petaling Jaya, Dallas, Lagos, Nagpur, Houston, Brisbane, Busan, Karachi, Coimbatore, Seoul, Caracas, Atyrau, Perth, Haryana, Bengaluru, Jaipur, Al Jubail, Kuwait City, Al Khobar, Sydney, Ranchi, Chiyoda, Noida, Chandigarh, Secunderabad, Ahvaz, Port-of-Spain, Singapore, Gurgaon, Rajkot, Rio de Janeiro, Abu Dhabi, Hong Kong, Surat, Sharjah, Hanoi, London, Muscat, Jakarta, Navi Mumbai, Istanbul, Kolkata, Cairo, Mumbai, Santiago, Montreal, Faridabad, Vung Tau, Bangkok, Ankara, Ahmedabad, Granada, Melbourne, Tehran, Visakhapatnam, New Delhi, Los Angeles, Ho Chi Minh City, Edmonton, La Victoria, Baroda, Thane, Nashik, Kuala Lumpur, Moscow, Ernakulam, Courbevoie, Calgary, Geoje-si, Indore, New York, Mexico City, Gimhae-si, Ludhiana, Kanpur, Ulsan, Thiruvananthapuram, Manama, Doha, Chennai, Madrid, Jamshedpur, Algiers, Dammam