Incoloy 825 Shims
Incoloy DIN 2.4858 Shims Supplier, Manufacturer, Exporter, Stockist In India
Incoloy UNS N08825 Shims, 825 Incoloy Alloy Shmis Supplier, Manufacturer, Exporter in Mumbai, India
Introduction
Radiant Tubes And Fitting is one of the leading manufacturer, suppliers, exporter of Incoloy 825 Shims using high quality of raw material. Incoloy 825 Shims refers to a range of superalloys produced by the Special Metals Corporation group of companies. We offer Incoloy UNS N08825 Shims, Incoloy 825 Shims in all over worldwide. Our UNS N08825 Incoloy 825 Plates are against fluid and setting consumption, along these lines appropriate to the marine and radioactive businesses. Incoloy shims are used in Pharmaceutical Equipment, Chemical Equipment, Seawater Equipment, Heat Exchangers, Condensers, Pulp and Paper Industry, Offshore Oil Drilling Companies, Power Generation, Petrochemicals, Gas Processing, Specialty Chemicals, Pharmaceuticals. Incoloy 825 Shims has excellent resistance in an unbiased chloride media. We also offer these Products are available in different size, grades, specification & thickness as per the clients requirements.This article mentions your favorite hats at super low prices. Choose from same-day delivery, drive-up delivery or order pickup.
Incoloy 825 Shims Specification :
- Size : 0.5 MM TO 200 MM THICK IN 1000 MM TO 2500 MM WIDTH & 2500 MM TO 12500 MM LENGTH
- Specification : ASTM / ASME SB 168, ASTM / ASME SB 424 , ASTM / ASME SB 443
- Standard : ASTM, ASME and API
- Specialize : Shim Sheet, Perforated Sheet, B. Q. Profile.
- Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange)
- Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
- Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
INCOLOY 825 Shims EQUIVALENT GRADES
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Incoloy 825 | 2.4858 | N08825 | NCF 825 | NA 16 | ЭП703 | NFE30C20DUM | NiCr21Mo |
Incoloy 825 Shims CHEMICAL COMPOSITION
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr | Al | Ti |
| Incoloy 825 | 0.05 max | 1.00 max | 0.5 max | 0.03 max | 1.50 – 3.00 | 22.00 min | 38.00 – 46.00 | 19.50 – 23.50 | 0.02 max | 0.06 – 1.20 |
Incoloy 825 Shims MECHANICAL PROPERTIES
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation | Hardness (Brinell) |
| Incoloy 825 | 8.14 g/cm3 | 1400 °C (2550 °F) | Psi – 80,000 , MPa – 550 | Psi – 32,000 , MPa – 220 | 30 % |