Introduction
Radiant Tubes And Fitting is one of the leading manufacturer, suppliers, exporter of Incoloy 800/ 800h/ 800ht Shims using high quality of raw material. Incoloy 800/800h/800ht Shims have high strength and resistance to oxidation, carburisation and other harmful effects of high temperature exposure. The high contents of nickel and chromium in the alloys also give good corrosion resistance. Incoloy 800/ 800h/ 800ht Shims was the first of these alloys and it was slightly modified into Incoloy 800/ 800h/ 800ht Shims. This modification was to control carbon (.05-.10%) and grain size to optimize stress rupture properties. Incoloy 800H/HT shims was intended for high temperature structural applications. The nickel content makes the alloys highly resistant to both chloride stress-corrosion cracking and to embrittlement from precipitation of sigma phase. The general corrosion resistance is excellent. In the solution annealed condition, Incoloy 800/ 800h/ 800ht Shims have superior creep and stress rupture properties. Incoloy alloys 800H/HT shims are used in a variety of applications involving exposure to corrosive environments and high temperatures such as heat treating equipment, chemical and petrochemical processing, nuclear power plants and the paper pulp industry. Heat-treating equipment such as baskets, trays, and fixtures employ Incoloy 800/ 800h/ 800ht Shims. Chemical and petrochemical processing industries use the alloys for heat exchangers and other piping systems in nitric acid media especially where resistance to chloride stress-corrosion cracking is required. Power plants use them for super-heater and re-heater tubing. We also offer these Products are available in different size, grades, specification & thickness as per the clients requirements.
