Incoloy 800/800H/800HT Pipe Spools:
Incoloy DIN 1.4876 Pipe Spools, Incoloy UNS N08800 Spool Fittings, Incoloy 800HT Pipe Spools Supplier, Manufacturer, Exporter in India
Incoloy 800/800h/800ht Prefabricated Pipe Spool Supplier, Manufacturer, Exporter In Mumbai, India.
Introduction
Radiant Tubes And Fitting is one of the leading manufacturer, suppliers, exporter of Incoloy 800/800h/800ht Pipes Spools using high quality of raw material. Incoloy 800/800h/800ht Pipes Spools are a nickel-iron-chromium alloy with very good strength and excellent resistance to oxidation and carburization in high-temperature environments. Incoloy 800/800h/800ht Pipes Spools, which is used for the creep resistant applications. Incoloy 800 Spool Fittings will not become embrittled even after long time of usage in the 1200 Degree F – 1600 Degree F range where many stainless steels become brittle. The chemical composition of Incoloy 800/800h/800ht Pipes Spools provides great resistance to corrosive environments, such as crevice corrosion, pitting, stress- corrosion cracking and intergranular corrosion. Incoloy 825 (UNS N08825) Spool Fittings is often used in Acid production, Nuclear fuel reprocessing, Marine exhaust systems, Radioactive waste handling, Pickling tank heaters, tanks, and equipment. We also offer these Products are available in different size,grades, specification & thickness as per the clients requirements.
Specifications
| Material & Grade: | Incoloy ASME SB366/366M Incoloy 800, ASTM B366/366M Incoloy 800 |
| Dimension : | ASME B16.9, ANSI B16.9, ASME B16.28, ANSI B16.28, ANSI B16.25 |
Chemical Composition of Grade Incoloy Pipe Bends
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr | Al | Ti |
| 800 | 0.10 max | 1.50 max | 1.00 max | 0.015 max | 0.75 max | 39.50 min | 30.00 – 35.00 | 19.00 – 23.00 | 0.15 – 0.60 | 0.15 – 0.60 |
| 800H | 0.05 – 0.10 | 1.50 max | 1.00 max | 0.015 max | 0.75 max | 39.50 min | 30.00 – 35.00 | 19.00 – 23.00 | 0.15 – 0.60 | 0.15 – 0.60 |
| 800HT | 0.06 – 0.10 | 1.50 max | 1.00 max | 0.015 max | 0.75 max | 39.50 min | 30.00 – 35.00 | 19.00 – 23.00 | 0.15 – 0.60ᴬ | 0.15 – 0.60ᴬ |
| 825 | 0.05 max | 1.00 max | 0.5 max | 0.03 max | 1.50 – 3.00 | 22.00 min | 38.00 – 46.00 | 19.50 – 23.50 | 0.02 max | 0.06 – 1.20 |
Mechanical Properties of ASTM B366 Incoloy Pipe Bend
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 800 / 800H / 800HT | 7.94 g/cm3 | 1385 °C (2525 °F) | Psi – 75,000 , MPa – 520 | Psi – 30,000 , MPa – 205 | 30 % |
| 825 | 8.14 g/cm3 | 1400 °C (2550 °F) | Psi – 80,000 , MPa – 550 | Psi – 32,000 , MPa – 220 | 30 % |