Incoloy 800/ 800H/ 800HT Long Radius Bends
Ā
Ā
Ā
Introduction
Radiant Tubes And Fitting is a leading Manufacturer, Exporter, Supplier and Stockist of Incoloy 800/ 800H/ long radius bends in India. incoloy 800 Long Radius Bend with low carbon content. Thatās why, this renders exceptional formability and weldability, annealed and fabricated to enhance better performance, high strength against rupture making them suitable for irrigation and agriculture covering heavy fluid flow and thus, this, in turn, required strength and reinforcement. short radius bend and long radius bend ā to which both of them are having a midpoint-to- midpoint length, along with double the indistinguishable 90 degree elbow. The most important application for these pipe fittings is in heater coils and heat exchangers. This incoloy uns n07800 long Radius Bend allow purport insertion of pipes due to its long bodies and Keene so room for leakage and also help in maximizing drainage of waste. Also, itās provides cleaning and hygiene for food-related processing. Our incoloy 800 Long Radius Bend and incoloy 800 Long Radius Bend have high demand over the international market. incoloy 800 Pipe Bends such as incoloy 800 Long Radius Bend, incoloy 800 Piggable Bend, incoloy 800 Hot Induction Bend, incoloy 800 Seamless Pipe Bend, incoloy 800 Welded Pipe Bend, incoloy 800 U Pipe Bend, incoloy 800 J Pipe Bend, incoloy 800 Mitered Pipe Bend, incoloy 800 3D Pipe Bend etc. These incoloy 800 long radius bends are available in various sizes, shapes as per the requirements of our clients.
Standard Specification For Incoloy ASTM B366 Long Radius Bends
Ā
Specifications :Ā ASTM B366 & ASME SB366
Dimensions :Ā ASME/ANSI B16.9 / B16.28 and MSS SP-43 / SP-75
Size :Ā Seamless Pipe Bends (1/2ā³ ā 24ā³), ERW / Welded / Fabricated Pipe Bends (2ā³ ā 36ā³)
Outer Diameter :Ā 38.0 mm ā 206.0 mm
Wall Thickness :Ā 1.5 mm / 2.0 mm / 3.0 mm ā greater wall thickness at request
Bend Radii :Ā 75 / 100 / 150 / 250 / 300 / 500 / 800 / 1,000 / 1,200 / 1,500 mm
Bending Radius(R):Ā R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom
Bending angle (Īø):Ā 15Ā°, 30Ā°, 45Ā°, 60Ā°, 90Ā°, 135Ā°, 180Ā°
Grades :Ā Incoloy 800, 800H, 800HT, 825, 925 Pipe Bends
Ā
Ā
Chemical Composition of Grade Incoloy Pipe Bends
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr | Al | Ti |
| 800 | 0.10 max | 1.50 max | 1.00 max | 0.015 max | 0.75 max | 39.50 min | 30.00 ā 35.00 | 19.00 ā 23.00 | 0.15 ā 0.60 | 0.15 ā 0.60 |
| 800H | 0.05 ā 0.10 | 1.50 max | 1.00 max | 0.015 max | 0.75 max | 39.50 min | 30.00 ā 35.00 | 19.00 ā 23.00 | 0.15 ā 0.60 | 0.15 ā 0.60 |
| 800HT | 0.06 ā 0.10 | 1.50 max | 1.00 max | 0.015 max | 0.75 max | 39.50 min | 30.00 ā 35.00 | 19.00 ā 23.00 | 0.15 ā 0.60į“¬ | 0.15 ā 0.60į“¬ |
| 825 | 0.05 max | 1.00 max | 0.5 max | 0.03 max | 1.50 ā 3.00 | 22.00 min | 38.00 ā 46.00 | 19.50 ā 23.50 | 0.02 max | 0.06 ā 1.20 |
Ā
Ā
Mechanical Properties of ASTM B366 Incoloy Pipe Bend
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 800 / 800H / 800HT | 7.94 g/cm3 | 1385 Ā°C (2525 Ā°F) | Psi ā 75,000 , MPa ā 520 | Psi ā 30,000 , MPa ā 205 | 30 % |
| 825 | 8.14 g/cm3 | 1400 Ā°C (2550 Ā°F) | Psi ā 80,000 , MPa ā 550 | Psi ā 32,000 , MPa ā 220 | 30 % |