Incoloy 800/ 800H/ 800HT Forged Fittings
ASTM B564 Incoloy 800 Forged Threaded Bushing, Incoloy 800H Socket Weld Cap, Incoloy Alloy 800HT Bull Plug Supplier
Incoloy Alloy 800/800H/800HT Forged Fittings Suppliers, manufacturer, exporter, stockist, wholesaler in India
Introduction
Radiant Tubes And Fitting is one of the leading manufacturer, suppliers, exporter, stockist of Incoloy 800/ 800H/ 800HT Forged Fittings in India as well as all over the world. Incoloy 800 forged fitting, Incoloy 800H forged fitting, incoloy 800HT Forged Fitting are used in Offshore rigs and onshore petrochemical plants and oil refineries, process plant for pharmaceuticals, surfactants, chemicals and additives, energy (Gas and Electricity), Nuclear and Defence industries, marine and Shipbuilding, paper and pulp plant, anywhere there is corrosion/high or low temperature/pressure. Incoloy 800 Forged Fittings to most national and international standards are available, including ASME B16.11 and BS3799, Incoloy 800 Socket Weld and Incoloy 800 Screwed Fittings, ASME B16.5, ASME B16.47, BS EN1092 (BS 4504), BS 10, DIN, UNI, NF E 29. We have probably the largest stock of Incoloy 800 threaded pipe fittings in India as well as in globe market. Incoloy 800 Forged Threaded Elbow (UNS N08800) is extremely resistant to corrosion, even in acidic environment. Incoloy 800H Forged Threaded Tee (UNS N08810) is excellent resistance to oxidation, sulfidation, and carburization. Heat treatment retorts, muffles jigs and fixtures. Incoloy 800HT Forged Threaded Cross (UNS N08811) to a great effect. Our Alloy 800 Forged Threaded Fittings are resistant to embrittlement from precipitation of sigma phase and chloride stress ā corrosion cracking due to the nickel content.
Equivalent Grades of Incoloy 800/ 800H/ 800HT Forged Fittings:
| Standard | Incoloy 800 | Incoloy 800H | Incoloy 800HT |
| UNS | N08800 | N08810 | N08811 |
| WERKSTOFF NR. | 1.4876 | 1.4958 / 1.4876 | 1.4859 / 1.4876 |
| AFNOR | Z8NC32-21 | Z8NC33-21 | ā |
| JIS | NCF 800 | NCF 800H | NCF 800HT |
| GOST | ŠŠ670 | ŠŠ670 | ŠŠ670 |
| OR | XH32T | XH32T | XH32T |
| EN | X10NiCrAlTi32-20 | X5NiCrAlTi31-20 | X8NiCrAlTi32-21 |
| BS | NA 15 | NA 15(H) | NA 15(HT) |
Ā
Specification ofĀ Incoloy 800/ 800H/ 800HT Forged Fittings:
| Grades | : | Incoloy 800 ā UNS N08800, Incoloy 800H / HT ā UNS N08810/N08811 |
| Standards | : | ASTM, ASME ANSI B16.11 & BS3799, etc. |
| Specifications | : | ASTM B 564 / ASME SB 564 |
| Size | : | 1/2ā³NB TO 4ā³NB IN |
| Class | : | 2000LBS, 3000LBS, 6000LBS, 9000LBS, etc. |
| Type | : | Socket Weld (S/W) & SCREWED (SCRD) ā NPT, BSP, BSPT, Threaded Fittings |
Ā
Chemical Properties ofĀ Incoloy 800/ 800H/ 800HT Forged Fittings:
| Incoloy 800 | Ni | Fe | Cr | Cu | Ti | Al | C | Mn | S | Si |
| 30.0-35.0 | 39.5 min | 19.0-23.0 | .75 max | .15-.60 | .15-.60 | .1 max | 1.5 max | .015 max | 1.0 max | |
| Incoloy 800H | Ni | Fe | Cr | Cu | Ti | Al | C | Mn | S | Si |
| 30.0-35.0 | 39.5 min | 19.0-23.0 | .75 max | .15-.60 | .15-.60 | .05-.10 max | 1.5 max | .015 max | 1.0 max | |
| Incoloy 800HT | Ni | Fe | Cr | Cu | Ti | Al | C | Mn | S | Si |
| 30.0-35.0 | 39.5 min | 19.0-23.0 | .75 max | .25-.60 | .85-1.20 | .06-.10 max | 1.5 max | .015 max | 1.0 max |
Ā
Mechanical Properties of Incoloy 800/ 800H/ 800HT Forged Fittings:
| Grade | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Incoloy 800 | 7.94 g/cm3 | 1350-1400 ā | 500 | 205 | 30 ā 35 % |
| Incoloy 800H | 7.94 g/cm3 | 1350-1400ā | 500 | 200 | 30 ā 35 % |
| Incoloy 800HT | 7.94 g/cm3 | 1350-1400ā | 500 | 200 | 30 ā 35 % |