Incoloy 800/ 800H/ 800HT Flanges
ASTM B564 Incoloy 800 Blind Flanges, Incoloy DIN 2.4858 Slip on Flanges, Incoloy 825 SWRF Flanges Suppliers in India.
(UNS N08800) Incoloy 800HT Weld Neck Flanges, 800H Inconel RTJ Flanges Supplier, Manufacturers, Exporter in India
Introduction
Radiant Tubes And Fitting is one of the leading manufacturer, suppliers, exporter of Incoloy 800/800h/800ht Flanges using high quality of raw material. Incoloy 800/800h/800ht Flanges Spectacle Blind Flanges highly resistant to both chloride stress – corrosion cracking and to embrittlement from precipitation of sigma phase. Incoloy 800/800h/800ht Long Weld Neck Flanges is also used in Chemical & Petrochemical processing. Incoloy alloys 800H shims 800HT shoms have superior creep and stress rupture properties. Incoloy 800/800h/800ht Flanges are used in a variety of applications involving exposure to corrosive environments and high temperatures such as heat treating equipment, chemical and petrochemical processing, nuclear power plants and the paper pulp industry. Heat-treating equipment such as baskets, trays. Radiant Tubes And Fitting is widely offer Incoloy 800/800h/800ht Flanges in India as well all over the world. We also offer these Products are available in different size,grades, specification & thickness as per the clients requirements.
Specification For Incoloy ASTM B564 800/800h/800ht Flanges
Specifications : ASTM B564 / ASME SB564
Dimensions : ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc.
Standard : ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc.
Size : 1/2″NB TO 60″NB
Class / Pressure : 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.
Flange Face Type : Flat Face , Raised Face, Ring Type Joint
Grades : Incoloy 800, 800H, 800HT Flanges
ASME SB564 Incoloy 800/800h/800ht Flanges Equivalent Grades
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN | OR |
| Incoloy 800 | 1.4876 | N08800 | NCF 800 | NA 15 | ЭИ670 | Z8NC32-21 | X10NiCrAlTi32-20 | XH32T |
| Incoloy 800H | 1.4958 / 1.4876 | N08810 | NCF 800H | NA 15(H) | ЭИ670 | Z8NC33-21 | X5NiCrAlTi31-20 | XH32T |
| Incoloy 800HT | 1.4859 / 1.4876 | N08811 | NCF 800HT | NA 15(HT) | ЭИ670 | – | X8NiCrAlTi32-21 | XH32T |
Chemical Composition of Grade Incoloy 800/800h/800ht Flanges:
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr | Al | Ti |
| 800 | 0.10 max | 1.50 max | 1.00 max | 0.015 max | 0.75 max | 39.50 min | 30.00 – 35.00 | 19.00 – 23.00 | 0.15 – 0.60 | 0.15 – 0.60 |
| 800H | 0.05 – 0.10 | 1.50 max | 1.00 max | 0.015 max | 0.75 max | 39.50 min | 30.00 – 35.00 | 19.00 – 23.00 | 0.15 – 0.60 | 0.15 – 0.60 |
| 800HT | 0.06 – 0.10 | 1.50 max | 1.00 max | 0.015 max | 0.75 max | 39.50 min | 30.00 – 35.00 | 19.00 – 23.00 | 0.15 – 0.60ᴬ | 0.15 – 0.60ᴬ |
Mechanical Properties of ASTM B564 Incoloy 800/800h/800ht Flanges
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 800 / 800H / 800HT | 7.94 g/cm3 | 1385 °C (2525 °F) | Psi – 75,000 , MPa – 520 | Psi – 30,000 , MPa – 205 | 30 % |