Incoloy 800/ 800H/ 800HT Perforated Sheet
Inconel 800/ 800H/800HT Perforated Sheets Supplier, Manufacturer, Exporter in India
ASTM B168 Incoloy 800/ 800H/ 800HT Perforated Sheet Supplier, Manufacturer, Exporter in India
Introduction
Radiant Tubes And Fitting is one of the leading Manufacturer, Supplier, Exporter of Incoloy 800/ 800H/ 800HT Perforated Sheets in India. Incoloy 800/ 800H/ 800HT Perforated Sheets are incoloy-chromium alloy with an addition of aluminum for outstanding resistance to oxidation and other forms of high temperature corrosion. These Incoloy 800/ 800H/ 800HT Perforated Sheets (UNS N08800) are used for Heat treating muffles and retorts, Catalyst support grids in nitric acid production, Radiant tubes, Steam super-heater tube supports, and more. Incoloy 800/ 800H/ 800HT Perforated Sheets are also used in fabricated combustion chambers, tube supports and ash trays in the power generation industry. Incoloy 800/ 800H/ 800HT Perforated Sheets is a solid solution incoloy chromium heat resisting alloy which gives outstanding performance at temperatures up to about 1800°C. Incoloy 800/ 800H/ 800HT Perforated Sheets also has good aqueous corrosion resistance due to the high incoloy content in combination with chromium. Strength and toughness incoloy are good, and are retained during extended service at high temperature. incoloy 800 perforated sheet has good resistance to nitriding in diincoloyociated ammonia, and is only outperformed by Incoloy 800/ 800H/ 800HT Perforated Sheets in this application. incoloy 800 Rolling perforated sheet has good strength, ductility and toughneincoloy, and can be used at cryogenic temperatures. incoloy 800 Flat perforated sheet is a incoloy alloy and available in the various forms including incoloy Alloy 800 perforated sheet & incoloy 800 Perforated perforated sheet etc. incoloy 800 Rolling perforated sheet has good high temperature strength and retains its ductility after long service exposure, with good corrosion resistance under oxidizing conditions. incoloy 800 Hot rolled perforated sheet is very resistant to high-temperature oxidation – up to 2800 º F – and its also has good resistance to aqueous corrosion. incoloy 800 Clad perforated sheets are suitable to use at elevated temperatures. We offer incoloy 800 perforated sheet, incoloy 800 perforated sheet are in different sizes, specifications and shapes as per demands of our esteemed customers.
SPECIFICATIONS
Incoloy 800/ 800H/ 800HT Perforated Sheets :
Size : 0.5 MM TO 200 MM THICK IN 1000 MM TO 2500 MM WIDTH & 2500 MM TO 12500 MM LENGTH
Specification : ASTM / ASME SB 168, ASTM / ASME SB 424 , ASTM / ASME SB 443
Standard : ASTM, ASME and API
Specialize : Shim Sheet, Perforated Sheet, B. Q. Profile.
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange)
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Incoloy 800/ 800H/ 800HT Perforated Sheets STRUCTURALS EQUIVALENT GRADES
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN | OR |
| Incoloy 800 | 1.4876 | N08800 | NCF 800 | NA 15 | ЭИ670 | Z8NC32-21 | X10NiCrAlTi32-20 | XH32T |
| Incoloy 800H | 1.4958 / 1.4876 | N08810 | NCF 800H | NA 15(H) | ЭИ670 | Z8NC33-21 | X5NiCrAlTi31-20 | XH32T |
| Incoloy 800HT | 1.4859 / 1.4876 | N08811 | NCF 800HT | NA 15(HT) | ЭИ670 | – | X8NiCrAlTi32-21 | XH32T |
Incoloy 800/ 800H/ 800HT Perforated Sheets CHEMICAL COMPOSITION
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr | Al | Ti |
| 800 | 0.10 max | 1.50 max | 1.00 max | 0.015 max | 0.75 max | 39.50 min | 30.00 – 35.00 | 19.00 – 23.00 | 0.15 – 0.60 | 0.15 – 0.60 |
| 800H | 0.05 – 0.10 | 1.50 max | 1.00 max | 0.015 max | 0.75 max | 39.50 min | 30.00 – 35.00 | 19.00 – 23.00 | 0.15 – 0.60 | 0.15 – 0.60 |
| 800HT | 0.06 – 0.10 | 1.50 max | 1.00 max | 0.015 max | 0.75 max | 39.50 min | 30.00 – 35.00 | 19.00 – 23.00 | 0.15 – 0.60ᴬ | 0.15 – 0.60ᴬ |
ASTM B168 Incoloy 800/ 800H/ 800HT Perforated Sheets MECHANICAL & PHYSICAL PROPERTIES:
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Incoloy 800 / 800H / 800HT | 7.94 g/cm3 | 1385 °C (2525 °F) | Psi – 75,000 , MPa – 520 | Psi – 30,000 , MPa – 205 | 30 % |