Monel 400 Long Radius Bends

Monel 400 werkstoff WNR 2.4360 long radius bends Manufacturer, Exporter & Suppliers in India.

ASTM B366 Monel UNS N04400 long radius bends Manufacturer, Supplier & Exporter in India.

Introduction

Radiant Tubes And Fittings is leading manufacturer, supplier, exporters and stoickest for high quality monel 400 long radius bends. Radiant Tubes And Fittings offer a complete range of 400 long radius bends as Monel ASTM B366 400 Pipe Bends such as Monel 400 Piggable Bend, 400 Monel Alloy Seamless Pipe Bend, Alloy 400 Welded Pipe Bend, Monel Alloy 400 J Pipe Bend, Monel K500 Mitered Pipe Bend, Monel 400 3D Pipe Bend and more. monel 400 long radius bends are widely used in various application industries like sea water and brackish waters and acids like sulphuric acid and many others. Radiant Tubes And Fittings export, Supply & Manufacture monel 400 forms like seamless pipe, tubes, plates, sheets, shims, long radius bends, round bars, wires, long radius bends, valves, long radius bends and many others.

Equivalent Grades of Monel 400 long radius bends

STANDARD	WERKSTOFF NR.	UNS	JIS	AFNOR	BS	GOST	EN
Monel 400	2.4360	N04400	NW 4400	NU-30M	NA 13	МНЖМц 28-2,5-1,5	NiCu30Fe

Specifications of Monel 400 long radius bends

Specifications : ASTM B366 & ASME SB366

Dimensions : ASME/ANSI B16.9 / B16.28 and MSS SP-43 / SP-75

Size : Seamless Pipe Bends (1/2″ – 24″), ERW / Welded / Fabricated Pipe Bends (2″ – 36″)

Outer Diameter : 38.0 mm – 206.0 mm

Wall Thickness : 1.5 mm / 2.0 mm / 3.0 mm – greater wall thickness at request

Bend Radii : 75 / 100 / 150 / 250 / 300 / 500 / 800 / 1,000 / 1,200 / 1,500 mm

Bending Radius(R): R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom

Bending angle (θ): 15°, 30°, 45°, 60°, 90°, 135°, 180°

Grades : Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500)

 

Chemical Composition of Monel 400 long radius bends

	Ni	Fe	C	Mn	Si	Cu	Al	Ti	S
Monel 400	63.0 min	1.0 – 2.5	0.3 max	2.0 max	0.5 max	28.0 – 34.0	0.50 max	–	0.02 max

 

Mechanical & Physical Properties of Monel 400 long radius bends

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
8.8 g/cm3	1350 °C (2460 °F)	Psi – 80,000 , MPa – 550	Psi – 35,000 , MPa – 240	40 %

 

Types of Monel 400 long radius bends 

Monel 400 tubes Bend	Monel K500 Buttweld Bend
Monel 400 Mandrel Bends	Monel K500 Long Radius Bend
Monel UNS N04400 Piggable Bend	Alloy 400 Hot Induction Bend
Monel K500 Seamless Pipe Bend Suppliers	ANSI 400 Welded tube Bend
K500 Monel U tube Bend Dealer	Alloy 400 J tube Bend Exporter
Monel K500 Mitered tube Bend Stockholder	Monel 400 3D tube Bend Distributors
Monel UNS N05500 5D tube Bend	Alloy 400 10D tube Bend Manufacturer
Monel DIN 2.4360 2.5D tube Bend	Monel DIN 2.4375 22D tube Bend
Monel 400 Customized tube Bend	K500 Monel Bend
ANSI B16.9 Monel Alloy 400 12D tube Bending	Monel K500 High Pressure Bending Stockist
ASTM B366 Monel 400 180 Degree tube Bend	ASME SB366 Monel K500 DIN tube Bend
Monel 400 EN tube Bend	K500 Alloy ASME tube Bend
High Monel K500 Small Size tube Bending	ASME SB366M Monel 400 tube Bend Elbow
Monel 400 90 Degree tube Bend	K500 Monel 160 Deg tube Bend

 

Marking & Packing Of Monel 400 long radius bends 

Radiant Tubes And Fittings pack Monel 400 long radius bends properly and carefully to ensure that there is no damage to the Monel 400 long radius bends during the transit. We pack Monel 400 long radius bends in wooden boxes and supply it all over the world.

 

High-Quality Monel 400 long radius bends  – Quality Assurance!

Radiant Tubes And Fittings Is One Of The Most Trusted Exporter, Supplier, Stockist & Manufacturer Of Monel 400 long radius bends . Radiant Tubes And Fittings Offers High-Quality Monel 400 long radius bends. We Inspect Our Monel 400 long radius bends At Each Stage Of Production Process, To Make Sure That The Quality Of The Monel 400 long radius bends Is Not Compromised. They Are Examined To Confirm Their Standards And We Also Offer Third Party Inspection Of Our Monel 400 long radius bends On Demand Of Our Clients.Radiant Tubes And Fittings even Offer Test Certificates For Our Monel 400 long radius bends.

We Pack Monel 400 long radius bends Properly And Carefully To Ensure That There Is No Damage To Monel 400 long radius bends During The Transit. We Pack copper Monel 400 long radius bends In Wooden Boxes And Supply It All Over The World.

 

Why Choose Radiant Tubes And Fittings For Buying Monel 400 long radius bends?

• Huge Stock Of Monel 400 long radius bends.
• Large Production Capacity Of Monel 400 long radius bends
•  

  Radiant Tubes And Fittings Offer Highest Quality Monel 400 long radius bends At Lowest Price

• We Offer Customised Sizes For Monel 400 long radius bends Depending On Our Clients Requirement

Radiant Tubes And Fittings Offer High-Quality Monel 400 long radius bends With Test Certificates. We Even Allow Third Party Inspection.